# Elevation data

> Where TopoLines gets its terrain: GEDTM30 30 m worldwide, national lidar down to 1 m (0.5 m in Switzerland) for Europe and the US, or your own GeoTIFF.

Source: https://www.topolines.app/docs/elevation-data · TopoLines docs · updated 2026-11-15

Every map — Lines or Points — is traced from a **digital elevation model**
(DEM): a grid of ground heights. The source is picked in the **Precision**
menu of the Settings panel, and the one that actually served your zone is
shown in the **Map info** panel after each generate.

## Sources

| Source | Resolution | Coverage | Plan |
| --- | --- | --- | --- |
| **GEDTM30** | ~30 m | Worldwide | Free (Standard) |
| **AWS Terrain Tiles** | Mixed | Worldwide | Backup only |
| **IGN RGE ALTI** | 5 m | Metropolitan France | Pro (HD) |
| **USGS 3DEP** | Up to 5 m | United States | Pro (HD) |
| **IGN España MDT** | 5 m | Spain | Pro (HD) |
| **EA LIDAR** (Environment Agency) | 5 m | England | Pro (HD) |
| **BEV ALS** | 5 m | Austria | Pro (HD) |
| **swissALTI3D** (swisstopo) | 5 m | Switzerland | Pro (HD) |
| **TINITALY** (INGV) | 10 m | Italy | Pro (HD) |
| **DGM1** (Länder) | 5 m | Germany: Bavaria, North Rhine-Westphalia | Pro (HD) |
| **Your own GeoTIFF** | Yours | Your file | Pro |

**GEDTM30** is a *bare-earth* model: it represents the ground under the
forest canopy rather than the treetops, which gives cleaner contours in
wooded terrain. How much cleaner? We checked it against lidar at ten sites:
[Bare earth or treetops?](https://www.topolines.app/blog/gedtm30-vs-lidar)

## Precision menu

- **Standard — GEDTM30 30 m** (free): the default everywhere.
- **HD** (Pro): the best national model covering your zone, or GEDTM30
  30 m where there is none ([why GEDTM30](https://www.topolines.app/blog/hd-fallback-gedtm30)). The menu shows which one your zone will get.
- **Auto — best available** (Pro): picks the finest source for each zone
  automatically.

National models are served at the finest grid the zone allows: the smaller
the zone, the finer the grid. In France a zone up to about 3.5 km² is traced
from the 1 m RGE ALTI, up to about 14 km² at 2 m, and up to about 85 km² at
5 m. Every HD trace gets the same budget of grid cells, so tracing time stays
predictable whatever the zone size.

A zone that crosses a border between two national models falls back to the
worldwide GEDTM30 30 m, so a map is never stitched from two datasets. Large
zones inside one country depend on the model: England, Austria, Italy,
Switzerland and the German states coarsen their grid (up to 10–30 m) to stay
on national data, while France, Spain and the United States fall back to the
worldwide GEDTM30 30 m beyond about 85 km². The menu shows the source and grid
your zone will get before you generate, and Map info the one that served it.
See [Datasets](https://www.topolines.app/docs/datasets#automatic-precision) for the full grid table and
each country's limits.

How the grid is then turned into contours (smoothing, tracing, simplification,
sea and land below 0 m) is described in [How contours are traced](https://www.topolines.app/docs/contour-engine).


<figure class="fig-narrow"><img src="https://www.topolines.app/docs/precision-menu.webp" alt="Precision menu: Auto, Standard GEDTM30 30 m, HD 10 m" loading="lazy" /><figcaption>The Precision menu. Crowned entries need a Pro account.</figcaption></figure>

## Upload your own DEM

Pro accounts can trace their own terrain: pick **DEM upload** in the search
mode menu and choose a GeoTIFF (`.tif` / `.tiff`, georeferenced, up to 200 MB).
The map moves to the file's footprint; draw a zone inside it and generate as
usual. Your raster never leaves the server — only the traced output does.


<figure class="fig-narrow"><img src="https://www.topolines.app/docs/map-info.webp" alt="Map info panel: elevation range, relief, scale, CRS and source" loading="lazy" /><figcaption>Map info shows the elevation range and the source actually used for the zone.</figcaption></figure>

## Attribution

National models are open data published under their own licences. TopoLines
writes the source and its required credit into the metadata of every export,
so you can cite it where the map is used.
